Menu
Cart 0
House of Kolor S2-SG100 Shimrin2  Intercoat Clear  1 Quart

House of Kolor S2-SG100 Shimrin2 Intercoat Clear 1 Quart

House of Kolor

  • $52.99


Shimrin2
Intercoat Clear
1QT - S2-SG100

A protective clear for artwork tape outs on SHIMRIN® Base Coats. May be used to blend SHIMRIN® Pearl and Metallic Base Coats, to mix Pearl and Kandy Koncentrates, and to cut the SHIMRIN, base for touchups and blends. S2-SG100 Intercoat is an important tool for the custom painter. It is designed to be applied over a given base color, prior to taped art work or air brush art. This allows for easy removal of mis-tapes or air brush errors without damage to base color.
 
We recommend KC20 as the only clean up solvent. The intercoat is also applied over art work to preserve blending and fogging of various colors before applying kandy or klear topcoats. S2-SG100 is a safety layer, allowing you to pause and continue your project later. S2-SG100 is not a build up klear or a top coat klear. Limit applied coats to 4, however, if used as a carrier for base coat kandys. 
 
Used as a carrier for pearls or flakes when reduction from standard 2:1 goes to 1:1, more coats are acceptable. S2-SG100 is also used to reduce strength of base coats for blending colors or for checking touch ups before top coat klears are applied. Considered a must over Marblizer® before kandy or klear to guarantee adhesion. S2-SG100 Intercoat, as you can see, is an important workhorse for the painter! 
 
S2-SG100 is also used to reduce strength of base coats for blending colors or for checking touch ups before top coat klears are applied. Considered a must over Marblizer® before kandy or klear to guarantee adhesion. S2-SG100 Intercoat, as you can see, is an important workhorse for the painter!
S2-SG100 is coast to coast VOC compliant, including California.
 
Mixing Ratios
National Rule 2:1 by volume
" 2 parts Shimrin2® S2-SG100 Intercoat
" 1 part RU Reducer (RU310, RU311, RU312, or RU313)
 
California Rule 2:1 by volume
" 2 parts Shimrin2® S2-SG100 Intercoat
" 1 part RU LV Reducer (RU300 or RU301)
 
Note: Airbrush Application - reduce to desired viscosity or strength of added effects for all mixing ratios.
Note: Maximum recommended over reduction is 1 part S2-SG100 to 1 part reducer. This ratio is used when Kandy Koncentrates (KK), Pearls (DP), and Flake (F) are mixed with S2-SG100

We Also Recommend